Changing the fog light bulbs
Front fog light bulb
Front fog light.
Fig. 104
Front fog light.
Fig. 105
›››
Remove the bolt
Fig. 104
–
light grille with a screwdriver.
Subsequently, remove the clips located on
–
the edge of the grill with gentle leverage.
88
Remove the 3 bolts
–
move the fog light.
Remove the metal clip situated on the up-
–
per part of the fog light by pulling towards
the exterior of the vehicle
FR version fog-light bulb
Fog light: access to the connector
Fig. 106
and to the light bulb holder.
Remove the 4 bolts
–
inside of the wheel housing and the 2 bot-
tom bolts
with a screwdriver.
Pull the bumper to release it from its an-
–
chorages to access the connector and the
from the fog
1
light bulb holder.
Emergencies
›››
Fig. 105
to re-
2
›››
Fig. 105
.
3
›››
Fig. 106
from the
A
›››
Fig. 106
from the bumper
B
Note
Due to the difficulty of accessing fog light
bulbs, have them replaced at a Technical
Service or specialised workshop.
Remove the bulb holder
Front fog light.
Fig. 107
›››
Remove connector
Fig. 107
–
bulb.
›››
Turn the bulb holder
Fig. 107
–
left and pull.
Remove the bulb by pressing on the bulb
–
holder and turning it counter-clockwise at
the same time.
Installation involves all of the above steps
–
in reverse sequence.
Check that the bulb works properly.
–
from the
1
to the
2