Seat Toledo 2016 Owner's Manual page 19

● Child seats for groups 0, 0+ and 1 can be
fastened without seatbelts, using the "ISO-
FIX" and Top Tether* system, using the "ISO-
FIX" and Top Tether* securing rings
›››
page 17.
Seat locations
Weight
Front pas- Rear
group
senger a) outer
Group 0 U* U/L
<10 kg
Group 0+ U* U/L
<13 kg
Group I U* U/L
9-18 kg
Group II/III U* U
15-36 kg
a)
Compliance with current national legislation and the manu-
facturer's instructions is required when using or installing child
seats.
U: Suitable for universal approved restrain-
ing systems for use in this age category
(universal retention systems are those
fitted using the adult seat belt).
*: Move the front passenger seat as far
back as possible, as high as possible
and always disable the airbag.
L: Suitable for retention systems using the
"ISOFIX" and Top Tether* anchors.
The essentials
The systems include the child restraint sys-
tem mounting with an upper retaining strap
(Top Tether) and lower anchoring points on
the seat.

›››
in Safety instructions on page 74
Rear
centre
"ISOFIX" and Top Tether child seat
U
mounting system*
U
U
U
ISOFIX securing rings.
Fig. 24
Top Tether* securing ring.
Fig. 25
Child seats with the "ISOFIX" or Top Tether*
system can be secured quickly, easily and
safely on the rear outer seats.
When removing or fitting the child seat,
please be sure to follow the manufacturer's
instructions.
Move the rear seat as far to the rear as it
●
will go.
Press the child seat onto the "ISOFIX" re-
●
taining rings until the child seat can be heard
to engage. If the child seat is equipped with
Top Tether* anchor points, secure it to the
correspondent ring. Observe the manufactur-
er's instructions.
● Pull on both sides of the child seat to en-
sure that it is secure.
Two "ISOFIX" retaining rings are fitted on
each rear seat. In some vehicles, the rings
are secured to the seat frame and, in others,
they are secured to the rear floor. Access to
»
17