Seat Toledo 2016 Owner's Manual page 190

The manual regulator will remain in this posi-
tion.
›››
Service position Fig. 197
Key is in an open position – the key ar-
●
C
row points to the "unlocked" symbol. The key
cannot be removed from the key slot.
● The locking balls may be fully inserted
D
into the body of the ball-headed bar by ap-
plying some pressure.
The red marking on the manual regula-
●
E
tor points towards the white marking on the
ball-headed bar.
● Between the manual regulator and the
body of the ball-headed bar there is a clearly
visible space of approximately 4 mm
Once the ball-headed bar has been posi-
tioned like this, it will be ready to be placed
in the clamping bush.
WARNING
Do not use the ball-headed bar if it cannot be
correctly placed in the service position.
CAUTION
The key cannot be removed from the manual
regulator key slot when it is in the service po-
sition.
188
Operation
Assembly of the ball-headed bar
.
F
Fig. 198 Placing the ball-headed bar/locking
and removing the key.
Placing the key slot cover.
Fig. 199
Remove the cap from the clamping bush
–
›››
Fig. 195
by pulling downwards.
Place the ball-headed bar in the service po-
–
›››
page 187.
sition
Hold the ball-headed bar from underneath
–
›››
Fig. 198
and push it into the clamping
bush as far as possible until you hear it
›››
click into place .
The manual regulator automatically turns
A
in the opposite direction, adjusting to the
›››
ball-headed bar .
Switch off the manual regulator lock with
–
key by turning the key fully to the right
B
in the direction of arrow – the arrow in
1
the key displays the "locked" symbol.
Remove the key in the direction of arrow
–
.
2
Place cover over the manual regulator
–
C
lock in the direction of arrow
4
›››
Fig. 199.
3