Programming Foamed Milk And Warm Milk; Programming Milk With A Shot Of Coffe - Cold; Programming Milk With A Shot Of Coffe - Warm - Astoria Gloria AL Instruction Manual For User

10.2.2 Programming FOAMED MILK and WARM MILK

• Select the dose to be programmed (e.g. foamed milk);
• Wait for milk delivery;
• To confirm the dose, press the foamed milk key.
10.2.3 Programming MILK WITH A SHOT OF COFFEE - COLD -
• Fill the filter with the desired dose of ground coffee, press it with the coffee presser and attach the filter holder
to the delivery group;
• Select the button for milk with a shot of coffee;
• Wait for cold milk delivery;
• To confirm the dose of cold milk, press the key for milk with a shot of coffee again;
• Wait for delivery of warm milk with foam;
• To confirm the dose of warm milk with foam, press the key for milk with a shot of coffee again;
• Wait for coffee delivery;
• To confirm the dose of coffee, press the key for milk with a shot of coffee again.
10.2.3 Programming MILK WITH A SHOT OF COFFEE - WARM -
• Fill the filter with the desired dose of ground coffee, press it with the coffee presser and attach the filter holder to the delivery group;
• Select the button for milk with a shot of coffee;
• Wait for delivery of warm milk without foam;
• To confirm the dose of warm milk without foam, press the key for milk with a shot of coffee again;
• Wait for the dispensing of warm milk with foam;
• To confirm the dose of warm milk with foam, press the key for milk with a shot of coffee again;
• Wait for a few seconds (advisably 15-20 seconds);
• To confirm the length of the pause, press the button for milk with a shot of coffee again;
• Wait for coffee delivery;
• To confirm the dose of coffee, press the key for milk with a shot of coffee again.
i
To configure the machine with MILK WITH SHOT OF COFFEE - WARM - or - COLD refer to
chapter 14.
When configuring the machine for the selection of MILK WITH SHOT OF COFFEE - WARM -, it
will no longer be possible to deliver MILK WITH SHOT OF COFFEE - COLD - .
• To exit programming, press the PROG
are made for at least 25 seconds)
• Upon completion turn the programming key to the OFF position.
key (the machine automatically exits programming if no selections
A
o g
r
39
DISPLAY - ASD / DS