Cleaning The Steam Nozzle; Raised Cup Grilles; Spare Parts; Decommissioning - Astoria Plus4YouTS SAEP Use And Maintenance Manual

Hide thumbs Also See for Plus4YouTS SAEP:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 33
Plus4YouTS
7.7.5

Cleaning the steam nozzle

Weekly
Clean the steam nozzle as follows:
• Insert the steam wand into a jug with water and a specific
cleaner, in accordance with the manufacturer's instruc-
tions.
• heat the solution with the steam
nozzle.
• Let the nozzle cool down whilst keep-
ing it immersed in the solution for at
least 5 minutes, so that cleaner can
rise inside the nozzle due to the cool-
ing effect.
• Repeat the operation 2 or 3 times until no more milk resi-
due is dispensed.
7.7.6

Raised cup grilles

Daily
Clean the raised cup grilles as follows:
• Remove the grille from its housing by pulling it until it is
fully unlatched.
• Clean with a cloth dampened in lukewarm water.
• Push the grille once again until it completely disappears
into its storage position.

8. SPARE PARTS

Machine components and/or parts must only be replaced by
the Technician.
Under no circumstances are Users authorised to
replace machine components and/or parts.

9. DECOMMISSIONING

A Technician must be called out to decommission the ma-
chine as the equipment must be disconnected from the elec-
tricity and water mains, and all the internal circuits must be
emptied of water.
After being decommissioned, the machine can only be re-
commissioned by a Technician.
62
216
of
Under no circumstances are Users authorised to
decommission and/or recommission the machine
after long periods of inactivity.

10. DISASSEMBLY

The machine must only be dismantled by the Technician.

11. DISPOSAL

11.1 Disposal information

For the European Union and the European Economic Area
only.
This symbol indicates that the product cannot be disposed
of with household waste, pursuant to the WEEE Directive
(2012/19/EC), the Battery Directive (2006/66/EC) and/or the
national laws implementing those Directives.
The product should be handed over to a designated collection
point, for example the dealer when purchasing a new product
with similar features, or an authorised collection site that re-
cycles electrical and electronic equipment waste (WEEE), as
well as batteries and accumulators. Improper handling of this
type of waste can have negative consequences on the envi-
ronment and human health, due to the potentially hazardous
substances which are usually found in this kind of waste.
Your cooperation in correctly disposing of this product will
contribute to the effective use of natural resources and you
will avoid incurring fines provided by law. For more informa-
tion about recycling this product, contact either your local
authority, the entity responsible for waste collection, an au-
thorised dealer or your household waste disposal service.
Before disposing of the machine, we recommend
seeking advice from the Technician and/or the seller.

11.2 Environmental information

The machine features an internal lithium button battery,
which is located in the circuit board and ensures data storage.
Dispose of the battery in accordance with current national
regulations.
User Manual

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents