Motherboard; Figure 10-15 Incorrect And Correct Ways To Seat The Dsimm - Sun Microsystems Ultra 2 series Service Manual

Incorrect:
Corners Not Evenly Seated
FIGURE 10-15
5. Detach the wrist strap.
6. Replace the system unit cover.
See Section 7.3 "Replacing the System Unit Cover" on page 7-4.
7. Connect all cables to the back of the system or server unit.
8. Power on the system unit.
See Section 6.1 "Powering On the System Unit" on page 6-1.
10.6

Motherboard

To remove and replace a motherboard, proceed as follows.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Incorrect and Correct Ways to Seat the DSIMM
DSIMM notch
Correct:
Corners Evenly Seated