Figure 3-2 Sun Type-5 Keyboard - Sun Microsystems Ultra 2 series Service Manual

1. At the system prompt, type:
ok setenv diag-switch? true
2. At the keyboard, power cycle the system unit by simultaneously pressing the
Shift key and the Power-on key (see following figure). After a few seconds, press
the Power-on key again.
Stop key
Caps Lock
key indicator
Sun Type-5 Keyboard
FIGURE 3-2
3. Verify the following:
1. The display prompt is no longer displayed.
2. The monitor power-on indicator flashes on and off.
3. The keyboard Caps Lock key indicator flashes on and off.
4. When the POST is complete, type the following at the system prompt:
ok setenv diag-switch? false
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
D key
Shift key
indicator
Scroll Lock
Power-on key
key indicator
Compose Num Lock
key indicator key indicator
Chapter 3 Power-On Self-Test 3-5