Ipsec Profile - HP 5920 Command Reference Manual

seq-number: Specifies a sequence number for the IPsec policy template, in the range of 1 to 65535. A
smaller number indicates a higher priority.
Usage guidelines
The parameters configurable for an IPsec policy template are the same as those you configure when
directly configuring an IKE-based IPsec policy. The difference is that more parameters are optional for an
IPsec policy template. Except the IPsec transform sets and the IKE peer, all other parameters are optional.
An IPsec policy template is a set of IPsec policy template entries that have the same name but different
sequence numbers.
With the seq-number argument specified, the undo command deletes an IPsec policy template entry.
An IPv4 IPsec policy template and an IPv6 IPsec policy template can have the same name.
Examples
# Create an IPsec policy template entry with the name template1 and sequence number 100, and enter
the IPsec policy template view.
<Sysname> system-view
[Sysname] ipsec policy-template template1 100
[Sysname-ipsec-policy-template-template1-100]
Related commands
• display ipsec { ipv6-policy-template | policy-template }
ipsec { ipv6-policy | policy } (sysytem view)
•
ipsec { ipv6-policy | policy } isakmp template
•

ipsec profile

Use ipsec profile to create an IPsec profile, and enter IPsec profile view.
Use undo ipsec profile to delete the specified IPsec profile.
Syntax
ipsec profile profile-name [ manual ]
undo ipsec profile profile-name
Default
No IPsec profile is created.
Views
System view
Predefined user roles
network-admin
Parameters
profile-name: Specifies a name for the IPsec profile, a case-sensitive string of 1 to 63 characters.
346