Pki Certificate Access-Control-Policy - HP 5920 Command Reference Manual

Parameters
domain domain-name: Specifies the name of a PKI domain, a case-insensitive string of 1 to 31
characters.
Usage guidelines
You can abort a certificate request if you want to change some parameters, such as common name,
country code, and FQDN, in the certificate request before the CA issues the certificate. Use the display
pki certificate request-status command to display the certificate request status.
Examples
# Abort the certificate request for the PKI domain 1.
<Sysname> system-view
[Sysname] pki abort-certificate- request domain 1
The certificate request is in process.
Confirm to abort it? [Y/N]:y
Related commands
display pki certificate request-status
•
pki request-certificate domain
•

pki certificate access-control-policy

Use pki certificate access-control-policy to create a certificate access control policy and enter its view.
Use undo pki certificate access-control-policy to remove a specified certificate access control policy.
Syntax
pki certificate access-control-policy policy-name
undo pki certificate access-control-policy policy-name
Default
No certificate access control policy exists
Views
System view
Predefined user roles
network-admin
Parameters
policy-name: Specifies a policy name, a case-insensitive string of 1 to 31 characters.
Usage guidelines
You can add multiple rules to a certificate access control policy.
Examples
# Create a certificate access control policy named mypolicy and enter its view.
<Sysname> system-view
196