Mac-Authentication User-Name-Format - HP 5920 Command Reference Manual

Parameters
offline-detect offline-detect-value: Sets the offline detect timer in the range of 60 to 65535, in seconds.
quiet quiet-value: Sets the quiet timer in the range of 1 to 3600, in seconds.
server-timeout server-timeout-value: Sets the server timeout timer in the range of 100 to 300, in seconds.
Usage guidelines
MAC authentication uses the following timers:
Offline detect timer—Sets the interval that the device waits for traffic from a user before it regards
•
the user idle. If a user connection has been idle within the interval, the device logs the user out and
stops accounting for the user.
Quiet timer—Sets the interval that the device must wait before it can perform MAC authentication
•
for a user who has failed MAC authentication. All packets from the MAC address are dropped
during the quiet time. This quiet mechanism prevents repeated authentication from affecting system
performance.
Server timeout timer—Sets the interval that the device waits for a response from a RADIUS server
•
before it regards the RADIUS server unavailable. If the timer expires during MAC authentication,
the user cannot access the network.
Examples
# Set the server timeout timer to 150 seconds.
<Sysname> system-view
[Sysname] mac-authentication timer server-timeout 150
Related commands
display mac-authentication

mac-authentication user-name-format

Use mac-authentication user-name-format to configure the type of user accounts for MAC authentication
users.
Use undo mac-authentication user-name-format to restore the default.
Syntax
mac-authentication user-name-format { fixed [ account name ] [ password { cipher | simple } password ]
| mac-address [ { with-hyphen | without-hyphen } [ lowercase | uppercase ] ] }
undo mac-authentication user-name-format
Default
Each user's MAC address is used as the username and password for MAC authentication, and letters in
the MAC addresses must be entered in lower case without hyphens.
Views
System view
113