Ipsec Transform-Set; Local-Address - HP 5920 Command Reference Manual
Hide thumbs
Also See for 5920:
- Command reference manual (607 pages) ,
- Configuration manual (424 pages) ,
- Fc and fcoe configuration manual (257 pages)
Table of Contents
Advertisement
<Sysname> system-view
[Sysname] ipsec sa idle-time 600
Related commands
•
display ipsec sa
sa idle-time
•
ipsec transform-set
Use ipsec transform-set to create an IPsec transform set and enter IPsec transform set view.
Use undo ipsec transform-set to delete an IPsec transform set.
Syntax
ipsec transform-set transform-set-name
undo ipsec transform-set transform-set-name
Default
No IPsec transform set exists.
Views
System view
Predefined user roles
network-admin
Parameters
transform-set-name: Specifies a name for the IPsec transform set, a case-sensitive string of 1 to 63
characters.
Usage guidelines
An IPsec transform set, part of an IPsec policy, defines the security parameters for IPsec SA negotiation,
including the security protocol, and the encryption and authentication algorithms.
Examples
# Create an IPsec transform set named tran1 and enter its view.
<Sysname> system-view
[Sysname] ipsec transform-set tran1
[Sysname-transform-set-tran1]
Related commands
display ipsec transform-set
local-address
Use local-address to configure the local IP address for the IPsec tunnel.
Use undo local-address to restore the default.
349
Advertisement
Table of Contents
