Certificate Request Url - HP 5920 Command Reference Manual

Parameters
count count: Sets the maximum number of attempts for querying certificate request status, in the range of
1 to 100.
interval minutes: Sets a polling interval in minutes, in the range of 5 to 168.
Usage guidelines
After a PKI entity submits a certificate request, the CA server might need a long period of time if it verifies
the certificate request manually. During this period, the PKI entity periodically queries the status of the
request so that it can obtain the certificate promptly after the certificate is issued. The PKI entity stops
querying the certificate request status after it obtains the certificate or if the maximum number of query
attempts is reached. The latter case means the certificate request fails.
If the CA server automatically issues certificates, the PKI entity can obtain the certificate immediately after
it submits a certificate request. In this case, the PKI entity does not send queries to the CA server.
Examples
# Set the polling interval to 15 minutes, and the maximum number of query attempts to 40.
<Sysname> system-view
[Sysname] pki domain aaa
[Sysname-pki-domain-aaa] certificate request polling interval 15
[Sysname-pki-domain-aaa] certificate request polling count 40
Related commands
display pki certificate request-status

certificate request url

Use certificate request url to specify the URL of the registration server for certificate request through the
SCEP protocol.
Use undo certificate request url to remove the configuration.
Syntax
certificate request url url-string [ vpn-instance vpn-instance-name ]
undo certificate request url
Default
The URL of the registration server is not specified.
Views
PKI domain view
Predefined user roles
network-admin
Parameters
url-string: Specifies the URL of the registration server for certificate request, a case-sensitive string of 1 to
51 1 characters.
177