Public-Key Local Destroy - HP 5920 Command Reference Manual

.++++++++++++++++++++++++++++++++++++++++++++++++++*
........+......+.....+......................................+..+................
.......+..........+..............+.............+...+.....+...............+..+...
...+.................+..........+...+....+.......+.....+............+.........+.
........................+........+..........+..............+.....+...+..........
..............+.........+..........+...........+........+....+..................
.....+++++++++++++++++++++++++++++++++++++++++++++++++++*
Create the key pair successfully.
Related commands
display public-key local public
•
•

public-key local destroy

public-key local destroy
Use public-key local destroy to destroy local key pairs.
Syntax
public-key local destroy { dsa | ecdsa | rsa } [ name key-name ]
Views
System view
Predefined user roles
network-admin
Parameters
dsa: Specifies the DSA type.
ecdsa: Specifies the ECDSA type.
rsa: Specifies the RSA type.
name key-name: Specifies the name of a local key pair. The key-name argument is a case-insensitive
string of 1 to 64 characters, including letters, digits, and hyphens (-). If no name is specified, the
command destroys the specified type of local key pairs that take the default names.
Usage guidelines
To avoid key compromise, destroy a local key pair and generate a new pair after an intrusion event has
occurred, the storage media of the device is replaced, the key pair has been used for a long time, or the
local certificate has expired. For more information about the local certificate, see Security Configuration
Guide.
Examples
# Destroy the local RSA key pairs with the default names.
<Sysname> system-view
[Sysname] public-key local destroy rsa
Confirm to destroy the key pair? [Y/N]:y
# Destroy the local DSA key pair with the default name.
163