Sa Duration - HP 5920 Command Reference Manual

Syntax
reset ike sa [ connection-id connection-id ]
Views
User view
Predefined user roles
network-admin
Parameters
connection-id connection-id: Specifies the connection ID of the IKE SA to be cleared, in the range 1 to
2000000000.
Usage guidelines
When you delete an IKE SA, the device automatically sends a notification to the peer.
Examples
# Display the current IKE SAs.
<Sysname> display ike sa
Total IKE SAs:
Connection-ID
----------------------------------------------------------
1
2
Flags:
RD--READY ST--STAYALIVE RL--REPLACED FD—FADING TO—TIMEOUT
# Delete the IKE SA with the connection ID 2.
<Sysname> reset ike sa 2
# Display the current IKE SAs.
<Sysname> display ike sa
Total IKE SAs:
Connection-ID
----------------------------------------------------------
1
Flags:
RD--READY ST--STAYALIVE RL--REPLACED FD—FADING TO—TIMEOUT

sa duration

Use sa duration to set the IKE SA lifetime for an IKE proposal.
Use undo sa duration to restore the default.
Syntax
sa duration seconds
undo sa duration
2
Remote
202.38.0.2
202.38.0.3
1
Remote
202.38.0.2
Flag DOI
RD|ST IPSEC
RD|ST IPSEC
Flag DOI
RD|ST IPSEC
397