Predefined user roles
network-admin
Parameters
ca: Specifies the CA to accept certificate requests.
ra: Specifies the RA to accept certificate requests.
Usage guidelines
The CA server determines which authority, CA or RA, accepts certificate requests. This authority setting
must be consistent with the that on the CA server.
An independent RA is recommended as the authority to accept certificate requests.
Examples
# Specify the RA to accept certificate requests.
<Sysname> system-view
[Sysname] pki domain aaa
[Sysname-pki-domain-aaa] certificate request from ra
certificate request mode
Use certificate request mode to set the certificate request mode.
Use undo certificate request mode to restore the default.
Syntax
certificate request mode { auto [ password { cipher | simple } password ] | manual }
undo certificate request mode
Default
The certificate request mode is manual.
Views
PKI domain view
Predefined user roles
network-admin
Parameters
auto: Specifies the certificate request mode as auto.
password: Specifies a password for certificate revocation.
cipher: Sets a ciphertext password for certificate revocation.
simple: Sets a plaintext password for certificate revocation.
password: Specifies the password string. This argument is case sensitive. If simple is specified, it must be
a string of 1 to 31 characters. If cipher is specified, it must be a ciphertext string of 1 to 73 characters.
manual: Specifies the certificate request mode as manual.
175