Session Cachesize - HP 5920 Command Reference Manual
Hide thumbs
Also See for 5920:
- Command reference manual (607 pages) ,
- Configuration manual (424 pages) ,
- Fc and fcoe configuration manual (257 pages)
Table of Contents
Advertisement
Usage guidelines
If you use this command to specify a PKI domain for an SSL server policy, the SSL server that references
the SSL server policy will obtain its digital certificate through the specified PKI domain.
Examples
# Specify PKI domain server-domain for the SSL server policy policy1.
<Sysname> system-view
[Sysname] ssl server-policy policy1
[Sysname-ssl-server-policy-policy1] pki-domain server-domain
Related commands
display ssl server-policy
•
pki domain
•
session cachesize
Use session cachesize to set the maximum number of sessions that the SSL server can cache.
Use undo session cachesize to restore the default.
Syntax
session cachesize size
undo session cachesize
Default
The SSL server can cache 500 sessions at most.
Views
SSL server policy view
Predefined user roles
network-admin
Parameters
size: Specifies the maximum number of cached sessions, in the range of 100 to 1000.
Usage guidelines
The SSL handshake protocol follows a complicated procedure to negotiate session parameters and
establish sessions. To simplify the procedure, SSL allows reusing negotiated session parameters to
establish sessions. This feature requires that the SSL server maintain information about existing sessions.
This command limits the maximum number of sessions that the SSL server can cache. If the number of
sessions in the cache reaches the maximum, SSL does not cache new sessions.
Examples
# Set the maximum number of cached sessions to 600.
<Sysname> system-view
[Sysname] ssl server-policy policy1
272
Advertisement
Table of Contents
