Server-Timeout - HP 5920 Command Reference Manual
Hide thumbs
Also See for 5920:
- Command reference manual (607 pages) ,
- Configuration manual (424 pages) ,
- Fc and fcoe configuration manual (257 pages)
Table of Contents
Advertisement
Views
LDAP server view
Predefined user roles
network-admin
Parameters
all-level: Specifies that the search goes through all sub-directories of the base DN.
single-level: Specifies that the search goes through only the next lower level of sub-directories under the
base DN.
Examples
# Specify the search scope for the LDAP authentication as all sub-directories of the base DN.
<Sysname> system-view
[Sysname] ldap server ccc
[Sysname-ldap-server-ccc] search-scope all-level
Related commands
display ldap scheme
•
•
ldap server
server-timeout
Use server-timeout to set the LDAP server timeout period, the maximum time that the device waits for an
LDAP response.
Use undo server-timeout to restore the default.
Syntax
server-timeout time-interval
undo server-timeout
Default
The LDAP server timeout period is 10 seconds.
Views
LDAP server view
Predefined user roles
network-admin
Parameters
time-interval: Specifies the LDAP server timeout period, in the range of 5 to 20 seconds.
Usage guidelines
If you change the LDAP server timeout period, the change is effective only for LDAP authentication that
occurs after your change.
90
Advertisement
Table of Contents
