802.1X Commands; Display Dot1X - HP 5920 Command Reference Manual

802.1X commands

display dot1x

Use display dot1x to display information about 802.1X.
Syntax
display dot1x [ sessions | statistics ] [ interface interface-type interface-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
sessions: Displays 802.1X session information.
statistics: Displays 802.1X statistics.
interface interface-type interface-number: Specifies an interface by its type and number.
Usage guidelines
If you specify neither the sessions keyword nor the statistics keyword, the command displays all
information about 802.1X, including session information, statistics, and configurations.
Examples
# Display all information about 802.1X.
<Sysname> display dot1x
802.1X protocol is enabled globally
CHAP authentication is enabled
Configuration: Transmit Period
Max number of 802.1X users is 1024 per slot
Current number of online 802.1X users is 1
Ten-GigabitEthernet1/0/1
802.1X protocol is enabled
Handshake is disabled
802.1X unicast-trigger is enabled
Periodic reauthentication is disabled
Quiet Period
Supp Timeout
Reauth Period 3600 s
Max attempts for sending an authentication request
is link-up
30 s, Handshake Period
60 s, Quiet Timer is disabled
30 s, Server Timeout
93
15 s
100 s
2