Vpn-Instance (Hwtacacs Scheme View) - HP 5920 Command Reference Manual

name to such an HWTACACS server, the device must remove the domain name. This command allows
you to specify whether to include a domain name in a username to be sent to an HWTACACS server.
If an HWTACACS scheme defines that the username is sent without the ISP domain name, do not apply
the HWTACACS scheme to more than one ISP domain. The HWTACACS server regards two users in
different ISP domains but with the same userid as one.
Examples
# Configure the device to remove the ISP domain name from the username sent to the HWTACACS
servers specified in HWTACACS scheme hwt1.
<Sysname> system-view
[Sysname] hwtacacs scheme hwt1
[Sysname-hwtacacs-hwt1] user-name-format without-domain
Related commands
display hwtacacs scheme

vpn-instance (HWTACACS scheme view)

Use vpn-instance to specify a VPN for an HWTACACS scheme.
Use undo vpn-instance to remove the configuration.
Syntax
vpn-instance vpn-instance-name
undo vpn-instance
Default
The HWTACACS scheme belongs to the public network.
Views
HWTACACS scheme view
Predefined user roles
network-admin
Parameters
vpn-instance-name: Name of the MPLS L3VPN, a case-sensitive string of 1 to 31 characters.
Usage guidelines
The VPN specified here takes effect for all servers in the HWTACACS scheme for which no VPN is
specified.
Examples
# Specify VPN test for HWTACACS scheme hwt1.
<Sysname> system-view
[Sysname] hwtacacs scheme hwt1
[Sysname-hwtacacs-hwt1] vpn-instance test
80