Ipsec { Ipv6-Policy-Template | Policy-Template } Policy-Template - HP 5920 Command Reference Manual

as the source interface is up, the negotiated IPsec SAs will not be removed and will keep working,
regardless of link failover.
After an IPsec policy is applied to a service interface and IPsec SAs have been established, if you bind
the IPsec policy to a source interface, the existing IPsec SAs are deleted.
Only the IKE-based IPsec policies can be bound to a source interface.
An IPsec policy can be bound to only one source interface. To bind an IPsec policy to another source
interface, you must first remove the current binding.
A source interface can be bound to multiple IPsec policies.
HP recommends using a stable interface, such as a Loopback interface, as a source interface.
Examples
# Bind the IPsec policy map to source interface Loopback 1 1.
<Sysname> system-view
[Sysname] ipsec policy map local-address loopback 11
Related commands
ipsec { ipv6-policy | policy } (system view)

ipsec { ipv6-policy-template | policy-template } policy-template

Use ipsec { ipv6-policy-template | policy-template } to create an IPsec policy template, and enter IPsec
policy template view.
Use undo ipsec { ipv6-policy-template | policy-template } to delete the specified IPsec policy template.
Syntax
ipsec { ipv6-policy-template | policy-template } template-name seq-number
undo ipsec { ipv6-policy-template | policy-template } template-name [ seq-number ]
Default
No IPsec policy template is created.
Views
System view
Predefined user roles
network-admin
Parameters
ipv6-policy-template: Specifies an IPv6 IPsec policy template.
policy-template: Specifies an IPv4 IPsec policy template.
template-name: Specifies a name for the IPsec policy template, a case-sensitive string of 1 to 64
characters.
345