HP 5920 Command Reference Manual page 330

Mode: manual
-----------------------------
Description: This is my first IPv6 policy
Security data flow: 3600
Remote address: 1000::2
Transform set: mytransform
Inbound AH setting:
AH SPI: 1235 (0x000004d3)
AH string-key: ******
AH authentication hex key:
Inbound ESP setting:
ESP SPI: 1236 (0x000004d4)
ESP string-key: ******
ESP encryption hex key:
ESP authentication hex key:
Outbound AH setting:
AH SPI: 1237 (0x000004d5)
AH string-key: ******
AH authentication hex key:
Outbound ESP setting:
ESP SPI: 1238 (0x000004d6)
ESP string-key: ******
ESP encryption hex key:
ESP authentication hex key:
Table 37 Command output
Field
IPsec Policy
Interface
Sequence number
Mode
The policy configuration is incomplete
Description
Description
IPsec policy name.
Interface applied with the IPsec policy.
Sequence number of the IPsec policy entry.
Negotiation mode of the IPsec policy:
•
manual—Manual mode.
•
isakmp—IKE negotiation mode.
•
template—IPsec policy template mode.
IPsec policy configuration incomplete. Possible causes include:
•
The ACL is not configured.
•
The IPsec transform set is not configured.
•
The ACL does not have any permit statements.
•
The IPsec transform set configuration is not complete.
•
The peer IP address of the IPsec tunnel is not specified.
•
The SPI and key of the IPsec SA do not match the IPsec policy.
Description of the IPsec policy.
318