Secondary Accounting (Hwtacacs Scheme View) - HP 5920 Command Reference Manual
Hide thumbs
Also See for 5920:
- Command reference manual (607 pages) ,
- Configuration manual (424 pages) ,
- Fc and fcoe configuration manual (257 pages)
Table of Contents
Advertisement
Related commands
display hwtacacs scheme
secondary accounting (HWTACACS scheme view)
Use secondary accounting to specify a secondary HWTACACS accounting server.
Use undo secondary accounting to remove a secondary HWTACACS accounting server.
Syntax
secondary accounting { ipv4-address | ipv6 ipv6-address } [ port-number | key { cipher | simple } string
| vpn-instance vpn-instance-name ] *
undo secondary accounting [ { ipv4-address | ipv6 ipv6-address } [ port-number | vpn-instance
vpn-instance-name ] * ]
Default
No secondary HWTACACS accounting server is specified.
Views
HWTACACS scheme view
Predefined user roles
network-admin
Parameters
ipv4-address: Specifies the IPv4 address of the secondary HWTACACS accounting server.
ipv6 ipv6-address: Specifies the IPv6 address of the secondary HWTACACS accounting server.
port-number: Specifies the service port number of the secondary HWTACACS accounting server, a TCP
port number in the range of 1 to 65535. The default setting is 49.
key { cipher | simple } string: Specifies the shared key for secure communication with the secondary
HWTACACS accounting server.
•
cipher string: Sets a ciphertext shared key. The string argument is case sensitive. In non-FIPS mode,
the key is a string of 1 to 373 characters. In FIPS mode, the key is a string of 15 to 373 characters.
simple string: Sets a plaintext shared key. The string argument is case sensitive. In non-FIPS mode,
•
the key is a string of 1 to 255 characters. In FIPS mode, the key is a string of 15 to 255 characters
and must contain numbers, uppercase letters, lowercase letters, and special characters.
vpn-instance vpn-instance-name: Specifies the MPLS L3VPN to which the secondary HWTACACS
accounting server belongs, where vpn-instance-name is a case-sensitive string of 1 to 31 characters. If
the server is on the public network, do not specify this option.
Usage guidelines
Make sure that the port number and shared key settings of the secondary HWTACACS accounting server
are the same as those configured on the server.
72
Advertisement
Table of Contents
