Password-Control Aging - HP 5920 Command Reference Manual

password-control aging

Use password-control aging to set the password expiration time.
Use undo password-control aging to restore the default.
Syntax
password-control aging aging-time
undo password-control aging
Default
The global password expiration time is 90 days, the password expiration time of a user group equals the
global setting, and the password expiration time of a local user equals that of the user group to which the
local user belongs.
Views
System view, user group view, local user view
Predefined user roles
network-admin
Parameters
aging-time: Specifies the password expiration time in days, in the range of 1 to 365.
Usage guidelines
The password expiration time in system view has global significance and applies to all user groups, the
password expiration time in user group view applies to all local users in the user group, and the
password expiration time in local user view applies to only the local user.
A password expiration time with a smaller application scope has higher priority. When applying
password expiration time to a local user, the system checks whether a password expiration time has been
configured for the local user. If there is a password expiration time for the local user, the system uses this
expiration time. If there is no password expiration time for the local user, the system uses the time for the
user group. If there is no password expiration time for the user group, the system uses the global
password expiration time.
Examples
# Set the global password expiration time to 80 days.
<Sysname> system-view
[Sysname] password-control aging 80
# Set the password expiration time for user group test to 90 days.
[Sysname] user-group test
[Sysname-ugroup-test] password-control aging 90
[Sysname-ugroup-test] quit
# Set the password expiration time for device management user abc to 100 days.
[Sysname] local-user abc class manage
[Sysname-luser-manage-abc] password-control aging 100
138