Table of Contents
Advertisement
9.
When the installation of Windows Server 2003 x64 Edition is finished, the system reboots automatically.
10.
The [Windows Setup] screen is displayed after logging on to the system.
IMPORTANT:
In this case, the [Windows setup] screen may not be displayed.
Be sure to install Microsoft Windows Server 2003 R2 x64 Edition DISC 2 according to
the following procedures.
You can install Microsoft Windows Server 2003 R2 x64 Edition DISC 2 after the
application of "System update".
Be sure to install Microsoft Windows Server 2003 R2 x64 Edition DISC 2.
In this case, note that the [Windows setup] screen is not displayed.
11.
Insert the Microsoft Windows Server 2003 R2 x64 Edition DISC 2 CD-ROM into the CD-RW/DVD-ROM
drive. Confirm the parameters and click [OK].
12.
Once the installation is completed, remove the Microsoft Windows Server 2003 R2 x64 Edition DISC 2
CD-ROM from the CD-RW/DVD-ROM drive, and restart the system.
Make sure to execute the tasks described in "Driver Installation and Advanced Settings" and "Updating the
System" of this manual.
Procedure for License Authentication
The Product Key used in the procedure for license authentication should match the COA label in which the product key
contained in Windows Server 2003 is written.
NOTES:
Execute the activation within 30 days. The system may be locked once 30 days have
passed.
The COA label may be attached to your server.
D-6
Advertisement
Table of Contents
