Table of Contents
Advertisement
Installing Windows Server 2003
Express Setup proceeds with the setup by selecting or inputting several parameters on the wizard. You can also save the
parameters to a floppy disk as a parameters file.
1.
Turn the power of peripheral device on, and then turn on the server.
2.
Insert the EXPRESSBUILDER DVD into the CD-RW/DVD-ROM drive of the server.
3.
Press the RESET switch or press Ctrl, Alt, and Delete to reboot from the EXPRESSBUILDER. (You may
also turn off and then on again to reboot the server.)
The system will boot from the DVD-ROM and the EXPRESSBUILDER starts.
Select "OS installation *** default ***" from the boot selection menu. (If you do not hit any key, "OS
installation" is selected automatically.)
The Top menu appears.
4.
Select [Perform the Express setup] from the Top Menu, and click [Next].
5-7
Advertisement
Table of Contents
