Table of Contents
Advertisement
Server
Positioning the cursor on "Server" shows the Server menu.
The items which can be set on the Server menu and their functions are described below. For the setting, first select
"System Management" or "Console Redirection" and press Enter to display the proper submenu.
The following screen shows when [5 Minutes] is set for [Boot Monitoring].
See the table below for the items.
Option
Parameter
Assert NMI
Disabled
on PERR
[Enabled]
Assert NMI
Disabled
on SERR
[Enabled]
FRB-2
Disable FRB2 Timer
Policy
[Disable BSP]
Do Not Disable BSP
Retry 3 Times
Boot
[Disabled]
Monitoring
5 minutes
10 minutes
15 minutes
20 minutes
25 minutes
30 minutes
35 minutes
40 minutes
45 minutes
50 minutes
55 minutes
60 minutes
Description
Indicates whether PCI PERR is supported or
not.
If this item is set "Enabled", the system offers
an error through the NMI when an error
occurred.
Indicates whether PCI SERR is supported or
not.
If this item is set "Enabled", the system offers
an error through the NMI when an error
occurred.
Specify whether the processor is disabled or
not when a FRB-2 error occurred in BSP.
Indicates whether the boot monitoring
function is enabled or disabled on booting.
To use this function, install NEC ESMPRO
Agent. Do not use this function if the system
is booted from the OS without the installation
of the NEC ESMPRO Agent or CD-ROM.
Set this item to "Disabled" if ARCServe uses
the Disaster Recovery Option.
4-25
Your Setting
Advertisement
Table of Contents
