Table of Contents
Advertisement
– Load the driver
This function is not usually used. You may have to use it if you add a new device to the server. (See
Chapter 5.)
Maintenance Tools (Normal Mode)
If you select this item, the Tool menu appears.
You can use the below functions for maintenance.
– Maintenance Utility
The Maintenance Utility is usually used by the service representative. (See Chapter 7.)
– BIOS/FW Updating
You can update the system BIOS using a floppy disk (prepare a 3.5" floppy disk).
– ROM-DOS Startup FD
The ROM-DOS Startup FD is used to start the ROM-DOS system.
– Test and diagnostics
This function allows you to diagnose this computer. (See Chapter 7.)
Maintenance Tools (Redirection Mode)
If you want to operate this computer via the BIOS redirection (the console-less function), select this item.
NOTE: If you operate this computer via the Remote KVM function, select the
"Maintenance Tools (Normal mode)".
The menu's functions are the same as the "Maintenance Tools (Normal Mode)".
6-3
Advertisement
Table of Contents
