Table of Contents
Advertisement
SETUP FLOW
Follow the flowchart below to set up the server.
Selecting a site
Select a suitable site for the server.
Unpacking the system
Unpack the server and accessories from the shipping carton box.
Assembling the rack-mount system
Assemble the 19-inch rack cabinet and install the server.
Connecting the peripheral devices
Connect the peripheral devices to the server.
Connecting the power cord
Connect the power cord to the server.
Turning on the server
Power on the server to start the software setups. Setups depend on the optional
internal devices installed and on the peripheral devices connected.
Installing the operating system
Install an operating system to the server. See Chapter 5.
Installing the utilities
Install the utilities provided on the EXPRESSBUILDER DVD.
See Chapter 6.
Making backup copies of the system information
Once all the system setup procedures are completed, make backup copies of the
system information.
System information is required for server recovery in case of trouble or after
replacing the system board.
3-2
Advertisement
Table of Contents
