Table of Contents
Advertisement
7.
Enter the virtual disk settings.
The [Enter RAID setting] step is displayed. Confirm the parameters, modify if necessary, and click [Next].
IMPORTANT: At "The number of the total physical devices", the Parameter File Creator
displays the upper limit that the RAID controller can support.
The total of "The number of physical devices used to create the logical drive" and "The
number of the physical devices specified as the hot spare" must not exceed "The number
of the total physical devices" which are connected to the target system.
NOTE: You can use only physical devices that have the same model number to configure
a logical drive.
6-8
Advertisement
Table of Contents
