Table of Contents
Advertisement
Memory Configuration
Selecting "Memory Configuration" on the Advanced menu displays the following screen.
See the table below for the items.
Option
Parameter
Installed
–
memory
Available
–
under 4GB
Memory
[No]
Retest
Yes
Extended
1MB
RAM Step
1KB
Every Location
[Disabled]
Online Spare
[Disabled]
Memory
Enabled
Memory RAS
[Normal]
Feature
Mirror
Description
Indicates the mounted memory capacity
(Display only).
Indicates the capacity of memory available in
the area smaller than 4GB. (Display only)
Clears the DIMM group error status
information. Run this menu when the failed
DIMM(s) are replaced.
"1MB" indicates that the memory test is done in
the unit of 1MB. "1KB" indicates that the
memory test is done in the unit of 1KB.
"Every-Location" indicates that every memory
device is tested.
"Disabled" indicates that only the memory
initialization is done.
Active when the Online Spare Memory can be
configured with the installed DIMMs.
Select "Enabled" to enable the Online Spare
Memory feature.
Active when the Memory Mirroring can be
configured with the installed DIMMs.
Select "Mirror" to enable the memory mirroring
function.
4-13
Your Setting
[
]: Factory-set
Advertisement
Table of Contents
