Table of Contents
Advertisement
USING YOUR SERVER
This section describes basic operations of your server, including how to use devices such as the CD-RW/DVD-ROM
drive. See Appendix B for notes on using DVD/CD-ROM, and accessories including the keyboard and the mouse.
Front Bezel
Remove the front bezel to power on/off the server, to access the CD-RW/DVD-ROM drive, and to install/remove hard
disk drives to/from the 2.5-inch hard disk drive bay.
IMPORTANT:
security key.
Installing or Removing the Front Bezel
You must remove the front bezel when powering on/off the server, accessing the CD-RW/DVD-ROM drive,
installing/removing a hard disk drive to/from the 2.5-inch hard disk drive bay, or removing the top cover.
1.
Insert the attached security key into the key slot, press slightly on the key and turn it one quarter to the left to
release the lock.
2.
Hold the right end of the front bezel lightly and pull it toward you.
3.
Slide the front bezel to the left a little to remove the tab from the frame and then remove the front bezel from
the server.
Tabs
To install the front bezel, latch the tab at the left side of the front bezel on the server frame. After the
installation, lock the front bezel by using the key for security.
To open the front bezel, you must unlock the door with the provided
2
Frame
1
Unlock
2-21
Lock
Advertisement
Table of Contents
