Table of Contents
Advertisement
Hot Remove
Follow the procedure below to execute a Hot Remove:
1.
Take the steps below to stop the device driver used by the Hot-plug PCI board you want to remove:
IMPORTANT:
(containing the PCI board) from the operating system interface. Failure to do so may cause
the system to fail.
(1) Double click the [Safety Remove Hardware] icon at the lower right side of the display.
The following window is displayed.
* The message in "Hardware devices:" depends on the location of the PCI board slot and of the number of
PCI boards installed.
Before removing a PCI board, be sure to stop the driver of the slot
9-31
Advertisement
Table of Contents
