Intrtest; Pkttest; Cputest - Broadcom NetXtreme User Manual

Broadcom NetXtreme Ethernet Adapter • Diagnostic User's Guide
a124b2 -- runs test a1,a2,a4 and b2
Options:
-e
-i
-n<DEC>
-b
10.126

intrtest

Command: intrtest
Description: Interrupt Test
Syntax: intrtest [iteration]
Options:
-n<DEC>
10.127

pkttest

Command: pkttest
Description: Perform MAC and/or PHY loopback test. This test will send 100 packets in
incremental length and check for contents of loopbacked packets.
Syntax: pkttest [<iteration>]
Options:
-e
-m
-n<DEC>
-p
10.128

cputest

Command: cputest
Description: TX / RX CPU Test. This test needs an input CPU file in the same location as
b57diag.exe. The default file name is cpu.bin or cpu05.bin unless specified by –f option.
run NVRAM verification also
run IPSec loopback also
iteration
Skip Bond Id verification
iteration (The default iteration is 1. 0 means run forever.)
run external loopback test
run mac loopback test
iteration (The default iteration is 1. 0 means run forever.)
run phy loopback test
page 142
Broadcom Confidential and Proprietary