Binchksum; Pmdcfg; Pmpd - Broadcom NetXtreme User Manual

Broadcom NetXtreme Ethernet Adapter • Diagnostic User's Guide
-w
-e
-l<HEX>
10.146

binchksum

Command: binchksum
Description: Verify the checksum of each piece of firmware in the input file that contains a
complete NVRAM image.
Syntax: binchksum –f<filename>
Options:
-f<string>
-v<HEX>
-o<string>
10.147

pmdcfg

Command: pmdcfg
Description: Display Power Management Info
Syntax: pmdcfg
10.148

pmpd

Command: pmpd
Description: Power Down MAC. Input file wol.txt should be found in the same location of
b57diag.exe. The input file contains patterns. If the file name is not specified, data zero will
be used.
Syntax: pmpd [filename]
Options:
-a<HEX>
-c<HEX>
-f<string>
Disable the write DMA test
Disable the chip reset execution before each DMA test
Number of BD sot DMA on read (0x1-0x79) (def=0xA)
filename
Minor revision (def=0)
output filename
1 enables ACPI Packet Match (def=00000000)
0 to add a pattern; otherwise delete (def=00000000)
File name which contains patterns
page 150
Broadcom Confidential and Proprietary