Blast - Broadcom NetXtreme User Manual

Broadcom NetXtreme Ethernet Adapter • Diagnostic User's Guide
-m<DEC>
Example:
1. Driver must be loaded before configure.
0:> loaddrv
2. Enable MAC loop back.
0:> mcaclpk -m1
Enabling MAC loopback ... OK
2. Disable MAC loop back.
0:> maclpk -m0
Disabling MAC loopback ... OK

10.77 blast

Command: blast
Description: Blast Packets in Poll Mode and display statistics. Load MAC driver before
running the test.
Syntax: blast
Options:
-a<DEC>
-c<DEC>
-d<DEC>
-e<DEC>
-f<string>
-g<DEC>
-h
-i
-j
-k
-l<DEC>
1 for enable , 0 for disable
IP total length (def=0)
Number of Tx buffer (def=100)
Interpacket GAP in microseconds (def=0)
Upper Limit of Tx buffer in incremental packet size (def=1514)
Sniffer file containing contents of Tx packets
Rx Threshold (def=5)
Enable Host Loopback
Increment length
Regenerate CRC-32 in host loopback mode
Applies CRC-32 check on Rx path
Length of Tx packet (def=60)
page 114
Broadcom Confidential and Proprietary