Asfeng; New; Asfprg; Sleep - Broadcom NetXtreme User Manual

Broadcom NetXtreme Ethernet Adapter • Diagnostic User's Guide
10.188

asfeng

Command: asfeng
Description: Enable/Disable ASF engineering mode.
Syntax: asfeng [options]
Options:
-d
-e
10.189

new

Command: new
Description: Display new command available. The default parameter for [n] is 10
Syntax: new [n]
10.190

asfprg

Command: asfprg
Description: Program asf firmware into NVRAM. The default file names are asfinit.bin,
asfcpua.bin, and asfcpub.bin, which can be overwritten by parameters.
Syntax: asfprg [init_img [rx_img [tx_img]]]
Options:
-v<HEX>
10.191

sleep

Command: sleep
Description: delay execution for specified length of milliseconds. Can be used in script
files to delay program execution.
Syntax: sleep [milliseconds]
10.192

fillpattern

Command: fillpattern
Description: Fill WOL matching pattern into Misc. Memory Loacation.
Disable ASF eingineering mode and Stop CPU
Enable ASF engineering mode and Cold Reset
verbose level (0,1,2) (def=00000001)
page 164
Broadcom Confidential and Proprietary