Segencrc; Secfg1 - Broadcom NetXtreme User Manual

Broadcom NetXtreme Ethernet Adapter • Diagnostic User's Guide
-e<DEC>
-s<DEC>
-a<DEC>

10.40 segencrc

Command: segencrc
Description: Append a CRC to the specified block
Syntax: segencrc <start-end> | <start length>

10.41 secfg1

Command: secfg1
Description: Configure NVRAM Group 1
Syntax: secfg1
Options:
-m
-r
-c
-v
-d
-s
-i
-p
-x
-w
Enable MBA Protocol (def=0), 0. PXE, 1. RPL, 2. BOOTP
Specify MBA Speed (def=0), 0. auto, 1. 10HD, 2. 10FD, 3.
100HD, 4. 100FD
Apply MBA setting to all ports on multiple device
(5718/5719/5720)
Mac address xx:xx:xx:xx:xx:xx
Power Dissipated D3:D2:D1:D0
Power Consumed D3:D2:D1:D0
Vendor ID
Vendor Device ID
SubSystem Vendor ID
SubSystem Device ID
PXE 1:Enable 2:Disable
PXE SP 0:Auto 1:10HD 2:10FD 3:100HD 4:100FD 6:1000FD
(TBI)
Magic Packet WOL 1:Enable 2:Disable
page 98
Broadcom Confidential and Proprietary