Loadfw; Cpudtt - Broadcom NetXtreme User Manual

Broadcom NetXtreme Ethernet Adapter • Diagnostic User's Guide

10.47 loadfw

Command: loadfw
Description: Load Firmware to Tx/RX CPUs
Syntax: loadfw
Options:
-b<HEX>
-d<HEX>
-f<string>
-i
-m
-r
-s
-t
-v
-m
-a<HEX>
-S

10.48 cpudtt

Command: cpudtt
Description: Read and display TX CPU trace (not valid for 5705)
Syntax: cpudtt <begin_addr>[- end_addr | num_bytes ]
Address range: 0x00 – 0x80
Example:
1. Read and display TX CPU trace from location 0x00 to 0x04.
0:> cpudtt 0-5
000 t0000002f c0000000 00000000 00000000 00000000 00000000
001 t00000000 00000000 00000000 00000000 00000000 00000000
set breakpoint (0=off) (def=00000000)
data pattern to be used for memory init. (def=00000000)
filename (for bcmediag compatibility)
don't initialize memory before loading, def=yes
don't turn on CPU Trace (def=on)
don't reset CPU (def=reset)
don't start cpu (def=start)
load to tx cpu, (def=rxpcu)
disable verbose
UMP firmware
set address in scratch pad to load (def=00000000)
Scratch Pad
page 102
Broadcom Confidential and Proprietary