Seinit; Searb; Seprotect; Selclock - Broadcom NetXtreme User Manual

Broadcom NetXtreme Ethernet Adapter • Diagnostic User's Guide
-m<DEC>
-n<DEC>
-p
-r
-s<DEC>

10.28 seinit

Command: seinit
Description: Initialize NVRAM block.
Syntax: seinit
Options:
-i<DEC>

10.29 searb

Command: searb
Description: set/report current NVRAM arbitration bit. Valid arbitraion number is 0..3.
Syntax: searb [n]

10.30 seprotect

Command: seprotect
Description: set gpio pin for NVRAM write protect. Use 'none' to disable write protect
feature.
Syntax: seprotect [0|1|2|none]

10.31 selclock

Command: selclock
Description: set Legacy EEPROM clock value (bit 16-24 of EEPROM addr reg)
Syntax: selclock <8bitNewValue>
Maximum Delay in ms (def=3000)
iteration (def=1)
Power reset
Random delay
Delay incremental time (us) (def=1)
do not restore NVRAM clock default value (def=0)
page 95
Broadcom Confidential and Proprietary