Seprg - Broadcom NetXtreme User Manual

Broadcom NetXtreme Ethernet Adapter • Diagnostic User's Guide
D
L1 PLL Powerdown Disable
Description:
Disable / Enable L1 PLL Powerdown
Disable(0)
Enable(1)
E
Clock Request
Description:
Disable / Enable Clock Request
Disable(0)
Enable(1)

10.10 seprg

Command: seprg
Description: Program NVRAM and management firmware
Syntax: seprg <file_name>
Input file need to be found in the same location as b57diag.exe.
Options:
-d
-f<string>
-l<HEX>
-m
-n
-i
-o<HEX>
-s
-a
-b
-k<DEC>
-u
-c
Disable L1 PLL Powerdown
Enable L1 PLL Powerdown
Disable Clock Request
Enable Clock Request
Do not perform device check
filename
length in bytes (Default = size of input file)
Do not restore original MAC address
Do not restore original all data at Configuration Block in OTP
Do not restore multiple SDID
offset of serial nvram (def=00000000)
Do not restore original Serial Number
Program ASF/management firmware
As APE UPDATE entry (for –a with APE)
pad to kilobytes (for –a with APE)
Program UMP firmware
Skip image CRC check
page 86
Broadcom Confidential and Proprietary
Configure
Configure