Intrtest; Pkttest; Cputest - Broadcom NetXtreme BCM570 Series Diagnostic User Manual

Broadcom NetXtreme Ethernet Adapter • Diagnostic User's Guide
a3 b1 -- runs test a3 and b1 only
a124b2 -- runs test a1,a2,a4 and b2
Options:
-e
-n<DEC>
10.112

intrtest

cmd: intrtest
Description: Interrupt Test
Syntax: intrtest [iteration]
Options:
-n<DEC>
10.113

pkttest

Command: pkttest
Description: Perform MAC and/or PHY loopback test. This test will send 100 packets in
incremental length and check for contents of loopbacked packets.
Syntax: pkttest [<iteration>]
Options:
-e
-m
-n<DEC>
-p
10.114

cputest

cmd: cputest
Description: TX / RX CPU Test. This test needs an input CPU file in the same location as
b57diag.exe. The default file name is cpu.bin or cpu05.bin unless specified by –f option.
Syntax: cputest [iteration]
run NVRAM verification also
iteration
iteration (The default iteration is 1. 0 means run forever.)
run external loopback test
run mac loopback test
iteration (The default iteration is 1. 0 means run forever.)
run phy loopback test
page 103
Broadcom Confidential and Proprietary