Setest; Bist; Nictest - Broadcom NetXtreme User Manual

Broadcom NetXtreme Ethernet Adapter • Diagnostic User's Guide
-w
10.123

setest

Command: setest
Description: Run NVRAM Test
Syntax: setest [iteration]
Options:
-e
-d<HEX>
-n<DEC>
-q
-r
-s<HEX>
10.124

bist

Command: bist
Description: Run BIST. The default iteration is 1. 0 means run forever.
Syntax: bist [iteration]
10.125

nictest

Command: nictest
Description: Run a set of NIC Tests. NIC test can include memory test, serial eeprom test,
interrupt test, packet exchange, MAC registers test, Mii registers test, cpu test, dma test.
This test can to be configured by running "diagcfg". See "diagcfg" for details. If a "test list"
is not entered below then a set of default tests are run.
Syntax: nictest [test list]
abcd -- runs all tests
b -- runs all test in group B
a3 b1 -- runs test a3 and b1 only
Test memory via memory_window
extensive test
ending offset (with -e option) (def=FFFFFFFF)
iteration
quiet mode
read only test
start offset (with -e option) (def=00000000)
page 141
Broadcom Confidential and Proprietary