Smbusrun; Cls; Loop; Dbmode - Broadcom NetXtreme User Manual

Broadcom NetXtreme Ethernet Adapter • Diagnostic User's Guide
10.184

smbusrun

Command: smbusrun
Description: Using 'smbusrun –mxxxxxx' or smbusrun xxxxxx' for master read/write.
–xxxx is the message include the slave address.
-for example, if slave address is -0x68, 'smbusrun 681234' write 1234 to slave.
'smbusrun 6919' read the data from slave.
Using 'smbusrun –s' for slave read/write.
Using 'smbusrun –f' to set the clock frequency.
Syntax: smbusrun [options]
Options:
-p
-s
-m<string> Master operation on the bus
-f<DEC>
10.185

cls

Command: cls
Description: Clear Screen.
Syntax: cls
10.186

loop

Command: loop
Description: loop on command.
Syntax: loop [iteration] <Command> [<parameter> ...]
10.187

dbmode

Command: dbmode
Description: Set DEBUG Mode to On or Off Mode.
Syntax: dbmode on|off
Add PEC
Slave Monitoring SMBus activities
Set clock frequency (def=100000)
page 163
Broadcom Confidential and Proprietary