Loadbootcode; Disasm - Broadcom NetXtreme User Manual

Broadcom NetXtreme Ethernet Adapter • Diagnostic User's Guide
Description: Halt CPU
Syntax: haltcpu
Options:
-r
-t

10.52 loadbootcode

Command: loadbootcode
Description: execute bootcode from file instead of NVRAM
Syntax: loadbootcode <filename>
Options:
-d<HEX>
-f<string>
-i
-m
-s
-t
-v
-a
-o<HEX>
-x<HEX>
-p<HEX>

10.53 disasm

Command: disasm
Description: Disassemble MIP instructions
Halt Rx CPU only
Halt Tx CPU only
data pattern to be used for memory init. (def=00000000)
filename
don't initialize memory before loading, def=yes
don't turn on CPU Trace (def=on)
don't start cpu
load to tx cpu, def=rxpcu
disable verbose
load APE bootcode
APE bootcode start offset (def=00000000)
Data swap Mode. 0:No Swap 1: Long Swap 2:Short Swap
Load APE code to 0:scratch pad 1:nvram
page 104
Broadcom Confidential and Proprietary