Intrtest; Pkttest - Broadcom 5720ZG User Manual

Broadcom NetXtreme Ethernet Adapter • Diagnostic User's Guide
This test can to be configured by running "diagcfg". See "diagcfg" for details. If a "test
list" is not entered below then a set of default tests are run.
Syntax: nictest [test list]
abcd -- runs all tests
b -- runs all test in group B
a3 b1 -- runs test a3 and b1 only
a124b2 -- runs test a1,a2,a4 and b2
Options:
-e
-n<DEC>
10.112

intrtest

cmd: intrtest
Description: Interrupt Test
Syntax: intrtest [iteration]
Options:
-n<DEC>
10.113

pkttest

Command: pkttest
Description: Perform MAC and/or PHY loopback test. This test will send 100 packets in
incremental length and check for contents of loopbacked packets.
Syntax: pkttest [<iteration>]
Options:
-e
-m
-n<DEC>
-p
run NVRAM verification also
iteration
iteration (The default iteration is 1. 0 means run forever.)
run external loopback test
run mac loopback test
iteration (The default iteration is 1. 0 means run forever.)
run phy loopback test
page 103
Broadcom Confidential and Proprietary