Apeping; Aperead; Apeotpkey; Apelog - Broadcom NetXtreme User Manual

Broadcom NetXtreme Ethernet Adapter • Diagnostic User's Guide
-s<DEC>
-A<DEC>
Note:"apectl –r" can be used to restart APE manually when firmware or config changes.

10.67 apeping

Command: apeping
Description: Send APE event to ping host from APE. The host can be IPv4, IPv6 address
or host name for a DNS lookup.
Syntax: apeping <host>

10.68 aperead

Command: aperead
Description: Read APE local view data thru APE.
Syntax: apectl start[-end | len]

10.69 apeotpkey

Command: apeotpkey
Description: S
Syntax: apeotpkey
Options:
-f
-p
-u

10.70 apelog

Command: apelog
Description: The command is used to create, query, and control the APE Logs in
NVRAM(in applicable devices, e.g. BCM5761)
Option:
-a
query specified PLDM State Sensor ID
send ASF remote control request (rst:0, off:1, on:2, pwrRst:3)
Program OTP keys with values from RNG if blank
Provision management controller
Unprovision management controller
operate on Audit Log instead of Event Log
page 109
Broadcom Confidential and Proprietary