Eswitchtest; Sbfcfg; Linkintrtest; Ipv6Extld - Broadcom NetXtreme User Manual

Broadcom NetXtreme Ethernet Adapter • Diagnostic User's Guide
Options:
-d
-l
-e
-f
-m
10.239

eswitchtest

Command: eswitchtest
Description: Run E-Switch Timer Test.
Syntax: eswitchtest
Options:
-v
10.240

sbfcfg

Command: sbfcfg
Description: Self-boot file configuration
Syntax: sbfcfg <masterfile> [<upgradefile>]
10.241

linkintrtest

Command: linkintrtest
Description: Link Changed Interrupt Test
Syntax: linkintrtest
10.242

ipv6extld

Command: ipv6extld
Description: Load IPv6 Extension Header File
Change the port to Docking mode
Change the port to Laptop mode
Enable E-switch functionality.
Disable E-switch functionality. This option will prevent PHY
loopback test, external loopback test (pkttest -e), and carrier test from
being performed on both laptop mode and docking mode. By setting
this option the tests are performed only on the default port.
internal engineering manual switch and MAC test
verbose
page 180
Broadcom Confidential and Proprietary