Dmatest; Teste - Broadcom NetXtreme User Manual

Broadcom NetXtreme Ethernet Adapter • Diagnostic User's Guide
Syntax: cputest [iteration]
Options:
-r<DEC>
-f<string>
-n<DEC>
10.129

dmatest

Command: dmatest
Description: DMA Test
Syntax: dmatest [iteration]
Options:
-4
-a<HEX>
-d
-f
-h
-l<HEX>
-n<DEC>
-o<HEX>
-w
10.130

teste

Command: teste
Description: The command enables tests. It affects nictest, regtest, pkttest, and memtest
commands. The test must starts with test group alphabet (a-d). If no number is
entered, all tests in that group are enabled.
Syntax: teste [<tests> [<tests>...]]
Example: teste a12bc
CPU reset count (def=1)
input filename
iteration (The default iteration is 1. 0 means run forever)
Allocate 4k-aligned buffers
NIC address (def=00002100)
Display DMA info.
Force to use 32-bit bus
Test high priority
Length of DATA to do DMA (def=00000400)
iteration
Buffer offset (def=00000000)
Test low priority
-- Enable test a1, a2, all tests in group b and c
page 143
Broadcom Confidential and Proprietary