Dma; Maclpk; Blast - Broadcom NetXtreme BCM570 Series Diagnostic User Manual

Broadcom NetXtreme Ethernet Adapter • Diagnostic User's Guide
10.66 dma_d
cmd: dma_d
Description: Dump DMA Entries with Decode
Syntax: dma_d <start> <end>

10.67 maclpk

cmd: maclpk
Description: Configure MAC loopback, 0 to disable, otherwise enable MAC loopback
Syntax: maclpk <n>
0 to disable. Otherwise enable
Example:
1. Driver must be loaded before configure.
0:> loaddrv
2. Enable MAC loop back.
0:> mcaclpb 1
Enabling MAC loopback ... OK
2. Disable MAC loop back.
0:> maclpb 0
Disabling MAC loopback ... OK

10.68 blast

cmd: blast
Description: Blast Packets in Poll Mode and display statistics. Load MAC driver before
running the test.
Syntax: blast
Options:
-a<DEC>
-c<DEC>
-d<DEC>
-e<DEC>
-f<string>
IP total length (def=0)
Number of Tx buffer (def=100)
Interpacket GAP in microseconds (def=0)
Upper Limit of Tx buffer in incremental packet size (def=1514)
Sniffer file containing contents of Tx packets
page 80
Broadcom Confidential and Proprietary