Dma; Maclpk; Blast - Broadcom 5720ZG User Manual

Broadcom NetXtreme Ethernet Adapter • Diagnostic User's Guide
10.65 dma_h
cmd: dma_h
Description: Dump DMA Entries
Syntax: dma_h <start> <end>
10.66 dma_d
cmd: dma_d
Description: Dump DMA Entries with Decode
Syntax: dma_d <start> <end>

10.67 maclpk

cmd: maclpk
Description: Configure MAC loopback, 0 to disable, otherwise enable MAC loopback
Syntax: maclpk <n>
0 to disable. Otherwise enable
Example:
1. Driver must be loaded before configure.
0:> loaddrv
2. Enable MAC loop back.
0:> mcaclpb 1
Enabling MAC loopback ... OK
2. Disable MAC loop back.
0:> maclpb 0
Disabling MAC loopback ... OK

10.68 blast

cmd: blast
Description: Blast Packets in Poll Mode and display statistics. Load MAC driver before
running the test.
Syntax: blast
Options:
-a<DEC> IP total length (def=0)
page 80
Broadcom Confidential and Proprietary